Guangdong Haida Equipment Co., Ltd.
Haida International Equipment CO.,LTD
Conforms to Clause 3.2 of GB/T 5023.2-2008, Clause 3.2 of IEC 60227-2:2003, Clause 7.3 of GB/T 5054.1-2008, ISO 441-1:2005 and other relevant standards.
This equipment is designed for wire bending tests. The test procedure is as follows: secure the test specimen onto the fixture and apply a specified load. The fixture swings left and right during testing. After a preset number of cycles, inspect the wire breakage rate; alternatively, record the total swing cycles when the wire loses electrical continuity. The tester features automatic cycle counting and will halt operation automatically once the specimen fails to conduct electricity.
| Parameter | Value |
|---|---|
| Test Stations | 6 stations |
| Bending Fixtures | 1 pair each of R1mm, R2.5mm, R3.0mm, R4.0mm, R5.0mm, R6.0mm, R12mm and R25.4mm |
| Remarks | 6 pairs pre-installed on the machine; 2 pairs supplied as spare parts randomly |
| Swing Angle | Continuously adjustable from ±30° to ±90° |
| Swing Speed | Adjustable from 10 to 60 cycles per minute (c.p.m) |
| Total Counter | Programmable and counting range 1~999999, displayed via high-brightness LED digital tubes |
| Individual Counters | 6 independent counters with 1~999999 range, LCD display |
| Load Weights | Standard 500g weights as specified in GB/T 5023; additional weights available at extra cost |
| Test Load | Electrical continuity monitoring |
| Test Wires | Supports 6 test specimens simultaneously |
| Wire Break Indication | Φ25mm flat-top high-brightness red LED indicator |
| Mechanical Drive System | AC motor driving crank-slider mechanism via reduction gearbox |
| Overall Dimensions | W870mm * D610mm * H820mm |
| Power Supply | AC 220V, 50Hz, 10A |
| Net Weight | 80kg |