Hai Da Labtester
Haida International Equipment CO.,LTD
Add to Cart
Brine To Perform Corrosion Handle Fatigue Testing Equipment
Description
The machine is used to test handle fatigue of cutlery, it load the handle, raising and lower under 15000 cyclic, then check the handle deformation or loose.
Design Standard
EN 12983-1
Standard Paraments
| Lower and raising speed of the test specimen | 25 times/minute |
| Power | 1 phase, AC 220V, 50～60Hz |
| Out dimension | (L×W×H)625mm×450mm×750mm |
| Fixture | two fixtures suitable different cutlery |
| Test cyclic | 15000 cyclic (adjustable) |
| lowest position | 1 mm |
| level surface covered | 5 mm thickness rubber having a hardness 50 ± 10 shore |
Kitchenware Tester Specifications
1)Platform in contact with the ovenware covered by a rubber plate thickness = 5 mm, hardness is (50 +/- 10 Shore)
2) Test speed is adjustable from 15 to 30 cycles per minute.
3) Two set of fixture provided for the lever handle type ovenware and ear type handle ovenware.
4) Pre set counter for the test cycle setting.
More Details
