Hai Da Labtester
Haida International Equipment CO.,LTD
Add to Cart
PID SSR Temperature Control Weathering Accelerated Aging UV Chamber BTHC
HD-E802 UV Aging Chamber - UVA.pdf
1.About Product
PID SSR Temperature Control Weathering Accelerated Aging UV Chamber BTHC can be simulated by the harm the sun, rain and dew on materials caused, QUV use fluorescent ultraviolet (UV) lamps simulate the effect of sunlight, the proposed use of cold rain and dew moisture, was placed on the test material under a certain temperature alternating light and moisture cycle program for testing, QUV with a few days or weeks of testing, we can reproduce the hazards outdoors for several months to several years appeared. Hazard types include: fading, discoloration, loss of light, powder, crack, turbidity, bubble-based, embrittlement, strength decline and oxidation.
2.USAGE:
PID SSR Temperature Control Weathering Accelerated Aging UV Chamber BTHC is mainly used in paint and ink paint, resins, plastics, printing and packaging, aluminum, adhesives, car and motorcycle industry, cosmetics, metals, electronics, electroplating, medicine and other fields. Conform ASTMG53-77 specification GB ﹑ ﹑ GJB MIL CNS ﹑ ﹑ ﹑ ASTM JIS IEC ﹑ ﹑ ﹑ Fed Test AATCC DIN ﹑ ﹑ BS ﹑ SAE standards.
| 3.Function: |
| How it Works |
4.Product specification:
| Inner chamber Size | 40W×114D×38Hcm | Customized |
| Outside dimension | 50W×130D×146Hcm | |
| Materials | SUS#304 stainless steel ( Internal and external) | |
| Temperature range | RT+10～70℃ | |
| Temperature uniformity | ±1℃ | |
| Temperature fluctuation | ±0.5℃ | |
| Temperature control | PID SSR control | |
| Humidity range: | ≥90%RH | |
| Controller | Korean TEMI 880 programmable controller | |
| Control mode | Balance temperature humidity control (BTHC) | |
| Test cycle setting | Illumination, condensation and water spray test cycle is programmable | |
| Lamp power | 40W/Piece | |
| Distance from sample to lamp | 50±3mm (adjustable) | |
| Centre distance between the lamp | 70mm | |
| Irradiance | 1.0W/cm2 | |
| Wavelength ultraviolet light | UV-A: 315-400nm | |
| UV-B: 280-315nm | ||
| Lamp lifetime | 1600hrs | |
| Effective irradiation areas | 640×1140mm | |
| Illumination temperature range | 50℃~70℃ | |
| Condensation temperature range | 40℃~60℃ | |
| Black panel temperature | 30℃~80℃ | |
| Standard Specimen Size | 75×290mm (24pcs) or 75x150mm (48pcs), or can be customized | |
| Testing time | 0～999H, adjustable | |
| Power | AC220V±10%, 50/60Hz, single phase, 5KW | |
| Protection system | Overload short circuit protection, over temperature protection, water | |
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.