Hai Da Labtester
Haida International Equipment CO.,LTD
Add to Cart
Home Appliance Thermal Testing Equipment Stainless Steel Shock Chamber
1. Description:
Home appliance usage Thermal Shock Chamber stainless steel Shock Chamber used to test the material structure or composite material in an instant by the extremely high temperatures and very low temperature continuous environment which can endure the degree of order in the shortest possible time to test its thermal expansion and contraction caused by chemical changes physical harm. The applicable the object material, including metals, plastics, rubber, electronic, ..., etc., can be used as the basis of its product improvement or reference improvement.
2. Specifications
| ize | Inner box | 35×35 ×40 | 50×40 ×40 | 60×50 ×50 | 35×35 ×40 | 50×40× 40 | 60×50× 50 | 35×35 ×40 | 50×40 ×40 | ||
| Outer box | 150×195 ×145 | 180×200 ×145 | 190×200 ×155 | 150×195 ×145 | 180×200 ×145 | 190×200 ×155 | 1501× 95 ×145 | 180×200 ×145 | |||
| High-temperature range | 80℃~200℃ | ||||||||||
| Low-temperature range | -55℃~-10℃ | -65℃~-10℃ | -75℃~-10℃ | ||||||||
| Testing room temperature | high | 60℃~150℃ | |||||||||
| low | -10℃~-40℃ | -10℃~-55℃ | 10℃~-60℃ | ||||||||
| Heating-up time | 60℃~200℃ about 25min | ||||||||||
| Cooling time | 20℃~-55℃ about 60min | 20℃~-65℃ about 75min | 20℃~-75℃ about 90min | ||||||||
| Impact recover time | High-temperature(150℃)about 30min | ||||||||||
| Low-temperature(-40℃or-55℃or-60℃)about 30min | |||||||||||
| Impact recover time 5min | |||||||||||
| weight | 2.5kg | 5kg | 10kg | 2kg | 5kg | 10kg | 2.5kg | 5kg | |||
| Inner material | SUS#304 stainless steel | ||||||||||
| Outer material | SUS#304 stainless steel | ||||||||||
| insulation | High-precision glass wool + PU foam rubber | ||||||||||
| Cooling system | Copy blowing type or water-cooled, and environmental protection refrigerant. | ||||||||||
| controller | Man-machine interface with touch-programmable control | ||||||||||
| protector | Compressor slide off, overheating, over-temperature, over-pressure, dry heat, motor overload protection switch | ||||||||||
| Attachment | Compartment frame 2, the test hole 1 | ||||||||||
| Power(KW) | 16 | 30 | 42 | 18 | 32 | 45 | 20 | 34 | |||
| Power supply | AC380V±10% 3PH 50/60Hz | ||||||||||
Notes
1) If the high-temp exposure range lower limit + 60°C is required or the low temp exposure range lower limit -60°C, please select the “ambient-temperature exposure” option
2) If the temp fluctuation need to below ±1.8°C please select the “Low temp fluctuation package”
3)Temperature heat-up/pull down time are applicable only during independent chamber operation
4) If the automatically operated sliding door required, please select the “Automatically door package”
5) Air-cooled condenser / Water-cooled condenser both available
6)Apply on water-cooled condenser only
3. Safety Devices
1)Hot chamber overheat protection switch
2)Cold chamber overheat protection switch
3)Air circulator overload alarm
4)Refrigerator high/low pressure protector
5)Compressor temperature switch
6)Air pressure switch
7)Fuse
8)Water suspension relay ( water-cooled specification only)
9)Compressor circuit breaker
10)Heater circuit breaker
11)Test area overheat/overcool protector
12)Air purge valve
4.Control
Operation and settings simplified by the use of a touch-screen LCD display (instructions displayed on-screen). At-aglance confirmation of test patterns, test area temperatures, temperature cycles, and trend graph displays.
| Setting | Interactive key input by touch panel |
| Display | LCD (5.7 inches) |
| Temperature control function | Test area: exposure temp. Hot chamber: pre-heating temp. Cold chamber: pre-cooling temp. |
| PID control | |
| Preset temperature range | High temperature: 60 to200’C Low temperature: -78 to 0’C |
| Setting resolution | 1’C |
| Input | Thermocouple type T (Copper/Copper-Nickel) |
| Setting and indication ranges | Preset time: 0 min. to 99 hours and 59 min. Preset cycle: 1 to 9,999 cycles |
| Accessory function | Timer preset Overheat/ overcool protection Power failure/ recovery selection Temperature recovery time setting Program memory Automatic power shut-off Programmed time display Test completion mode selection Trend graph Alarm history display Sensor calibration RS-232/ USB communication |